.

Yamaha YP 250 Majesty

.  

Make Model

Yamaha YP 250 Majesty

Year

1996 - 00

Engine

Four stroke, single cylinder. sohc

Capacity

249 cc / 15.2 cu-in
Bore x Stroke 69 x 66.8 mm
Cooling System Liquid cooled
Compression Ratio
Lubrication Forced pressure feed

Induction

Y28V Carburetor

Ignition 

Transistor
Starting Electric

Max Power

20 hp / 14.6 kW @ 6200 rpm

Max Torque

23.5 Nm / 1.9 kgf-m @ 5200 rpm
Clutch Dry internal expanding centrifugal

Transmission 

Continuously variable transmission
Final Drive V belt type

Front Suspension

Telescopic fork,

Rear Suspension

swing arm with double shock absorber

Front Brakes

Single 245mm disc

Rear Brakes

Single 230mm disc

Front Tyre

110/90-12

Rear Tyre

130/70-12
Wheelbase 1500 mm / 59.1 in
Seat Height 730 mm / 28.7 IN
Dry Weight 158 kg / 348.3 lbs

Wet Weight

162 kg / 357 LBS

Fuel Capacity 

11 Litres / 2.9 US gal

Braking 60 - 0 / 100 - 0

13.9 m / 40.3 m

Standing ¼ Mile  

19.0 sec / 1 07.7 km/h

Top Speed

123.5 km/h

The Yamaha YP250 Majesty was a large scooter that embodied a new genre of bikes emulating sporty sedans. It is capable of both agile maneuvering in line with the rider’s intentions as if the rider and bike are united, and a great sense of security to relax the rider’s body and mind. With the application of a new 250 cc engine, front and rear 12-inch wheels and 245-mm disc brakes on the front wheels, the YP250 had acceleration performance to spare, alongside stability at high speeds and secure braking. Its ergonomically designed seat with a variable back rest, aerodynamic form to minimize back pressure during riding, and body mount fairing allowed fatigue-free riding. Usability was also improved by the provision of three large spaces under the seat and the like, which allow the storage of a B4-sized attache case or full-face helmet.

Review

This scooter represents the second generation of high-tech scooter production.

First generation scooters included the Honda CN250 Space, and the Piaggio Hexagon. A common, critical problem with these two scooters was the front suspension system.

Neither has a classic hydraulic fork, but a double (CN250) and a single (Hexagon) swingarm system. These systems were able to provide quite good comfort during riding. But the trade off was an unsteady feeling, especially when the pavement was not perfect (and when is it ever?). So Yamaha decided to give their new scooter a motorcycle feel by installing a traditional front telescopic fork, along with a large disc brake and four-piston caliper that gives you secure braking. To complete this opera, a couple of large tires were fitted: 110/90 front and 130/70 rear. Wheel diameter increased also, to a whopping 12.0 inches. 

Another problem with scooters that Yamaha's engineers attempted to solve was wind blast on the rider. They've redesigned the entire bodywork, and you can see the results in the picture. It looks attractive enough, and reminds one of the front side of touring bikes like the BMW R1100 RT, and offers good protection to wind and rain. The similarity to a BMW is not limited to apperance. Considering the stated maximum speed (more than 126 Km/h), you'll be able to do some short touring, also. A trip of around 400 Km in one day would not be out of the question. There are several other cool features included with this scooter too, such as the seat, which opens toward the front and is held open by a hydraulic cylinder.

The similarity to a BMW is not limited to apperance.

Yamaha, in this case, hasn't presented anything innovative. They've preferred to stay with a traditional 4-stroke liquid-cooled single that should provide reduced service intervals. Of course, the robustness of the transmission system needs testing - a critical area in this kind of machine, especially when power is considerable.

Yamaha is moving scooters forward to a new generation. As in the computer world, where as soon as a new machine is presented to public it's immediately replaced by the next model, we want to try and define the requirements for the third generation scooter: Increasing wheel diameter to more than 15 inches (better 16 inch) Increasing the frame's torsional strength Increasing the diameter of the front fork Increasing the power and displacement of the engine (and of course the torque too) Increased power may cause some problems to the transmission system, so it might be necessary to devise a new system like the electronic/hydraulic sequential gear change system used in F1 racing and in some Porsche production models. Adding a rear disc brake Refining the wind/rain protection and the CX. With all of the above items incorporated into the next generation scooter, you would have a machine with good ride feeling, a satisfying cruise speed (around 140 Km/h), and good speed performance (max speed greater than 160 Km/h, quick acceleration, etc.). We hope another manufacturer would soon enter the challenge, which would stimulate competition, and help shorten the arrival time of the ultimate Third Generation Scooter.

Surce Motorcycle.com