.

ATK 700 Cruiser

.  

Make Model

ATK 700 Cruiser

Year

2010

Engine

Four stroke, 90° V-Twin DOHC,,4 valve

Capacity

687 cc / 41.9 cu in
Bore x Stroke 81.5 x 65 mm
Compression Ratio 11.5:1
Cooling System Liquid cooled

Induction

Electronic Fuel Injection

Ignition

Electronic

Starting

Electric

Max Power

46.2 kW / 62 hp @ 8 000 rpm

Max Torque

63.7 NM / 6.5 kgf-m / 47 lb-ft @ 8 000 rpm

Transmission

5 Speed 

Final Drive

Belt with automatic tension adjuster

Front Suspension

Telescopic fork

Rear Suspension

Twin shocks

Front Brakes

Single 300 mm disc, 4 piston caliper

Rear Brakes

Single 270 mm disc, 2 piston caliper

Wheelbase

1676 mm / 66 in

Seat Height

686 mm / 27 in

Wheels

Machined aluminium, multi-spoke

Front Tyre

120/80 -16

Rear Tyre

170/80 -15

Dry Weight

229 kg / 505 lb

Wet Weight

240 kg / 530 lb
.  

The ATK 700 is manufactured in Korea by S&T Motors and ultimate plans call for assembly of these models at ATK’s Utah facility. It is built around a 687cc fuel-injected V-Twin engine. The liquid-cooled, four-valve mill has a mildly aggressive 11.5:1 compression ratio. The 90 degree cylinder angle is inherently smooth and keeps the overall height of


The DOHC V-Twin is basically the same as that used in S&T's 650cc sportbikes, so it always feels a little racy. Both the torque and rev characteristics are impressive for a bike in this class. Claimed performance numbers are a respectable 62 horsepower and 47 lb/ft of torque at 8000 rpm.



Power is transferred through the five-speed transmission to a toothed belt final drive. The transmission ratios are wide spread, but there is plenty of grunt to keep the power delivery smooth. The belt drive features an automatic tension adjuster; therefore it is practically maintenance free. The transmission shifts smoothly, although there was a little free play in the shift linkage that I found annoying.

Helping contribute to the wide and low-slung look are the machined aluminum wheels. The front rides on a 120 series 16-inch tire and the rear a 170/80/15.

The wheels themselves are a nice blend of machined surfaces contrasted by painted black insets. The single 300 mm floating front disc brake features a four-piston caliper. Out back is a 270 mm disc with a two-piston binder. Braking power is strong, but does require a healthy amount of lever effort.