.

MV Agusta F4R

.  

Make Model

MV Agusta F4R

Year

2015

Engine

Four stroke, transverse four cylinder. DOHC, 4 radial valves per cylinder

Capacity

998 cc / 60.9 cu-in

Bore x Stroke

76 x 55 mm

Compression Ratio

13.4:1

Cooling System Liquid cooled,
Lubrication Wet sump

Engine management system

Integrated ignition - injection system MVICS (Motor & Vehicle Integrated Control System) with eight injectors Engine control unit Eldor EM2.0, throttle body full drive by wire Mikuni, pencil-coil with ion-sensing technology, control of detonation and misfire, Torque control with four maps, Traction Control with eight levels of intervention with lean angle sensor, EAS

Electronically

Assisted Shift - TSS Torque Shift System employing variable length intake runners

Voltage

 12 V

Alternator 350 W at 5000 r.p.m.
Battery 12 V - 8.6 Ah

Starting

 electric

Max Power

143.5 kW / 195 hp @ 13400 rpm

Max Torque

110.8 Nm / 11.3 kgm @ 9600 rpm

Clutch

Wet, multi-disc with back torque limiting device

Transmission 

Cassette styl 6 Speed 

Final Drive Chain

Primary drive

48/82

Gear Ratio

1st 14/37  2nd  16/33 3rd  18/31 4th 20/30  5th 22/29 6th 21/25

Final drive ratio

 15/41

Frame

Type CrMo Steel tubular trellis Rear swing arm pivot plates material Aluminium alloy

Front Suspension

50mmMarzocchi “UPSIDE - DOWN” telescopic hydraulic fork with adjustable rebound-compression damping and external spring preload

Front Wheel Travel 120 mm / 4.72 in

Rear Suspension

Progressive Öhlins TTX, single shock absorber with rebound and compression damping and spring preload adjustment Single sided swing arm material Aluminium alloy

Rear Wheel Ttavel 120 mm / 4.72 in

Front Brakes

2x floating 320mm discs and aluminium flange, Front brake caliper Brembo radial-type, single-piece with 4 pistons Ø 34 mm (Ø 1.34 in.)

Rear Brakes

Single 210mm disc Nissin with 4 pistons caliper

Rim Front

Aluminium alloy 3,50 in x 17 in

Rim Rear

Aluminium alloy 6,00 in x 17 in

Front Tyre

120/70 ZR17

Rear Tyre

200/55 ZR17

Trail

100,4 mm / 3.93 in.

Dimensions 

Length 2115 mm / 83.30 in

Width 750 mm / 29.51 in

Wheelbase

1430 mm /  56.27 in

Seat Height

830 mm / 2.68 in

Ground Clearance 115 mm / 4.7 in

Dry Weigh

191 Kg / 421.1 lb

Fuel Capacity 

17 Litres / 4.49. gal.

Timeless. Limitless. The F4 is now even faster and more powerful. Exclusive. Unique sensations and the most advanced technologies
come together in the MV Agusta sports model par excellence. State of the art electronics, lightweight construction and maximum attention t o detail. The new F4 is now even more highly evolved, designed to overcome every challenge: on the road, for maximum riding pleasure, especially on the track, where performance is all that matters.

The F4 has high-performance motorcycling history in its blood. It is the epitome of emotion, performance, speed and incomparable design.

THE MV AGUSTA F4. Breaking down the barriers of imagination. Encompassing cutting-edge technology and the latest engine design, the F4 is the best yet. A masterpiece. The top-of-the-range F4 RR contains unparalleled engineering solutions and thoroughbred excellence, ensuring total bike control and heart-stopping performance: an inertial control platform with lean angle sensor, a redefined riding position, full Ride-By-Wire, Öhlins electronic suspension and steering damper as well as GP-spec titanium con rods. All with completely new graphics and colors.

Features

The main characteristics of the MV Agusta F4 are:
•Short-stroke inline 4-cylinder engine with central cam chain and radial valves
•MVICS (Motor & Vehicle Integrated Control System) technology
•ELDOR electronics package with Ride-By-Wire and four engine maps
- Throttle sensitivity (can be set to Normal, Sport or Rain)
- Maximum torque (can be set to Normal, Sport or Rain)
- Engine braking (can be set to Normal, Sport or Rain)
- Engine response (can be set to Normal, Sport or Rain)
- Rev limiter (can be set to Normal, Sport and Rain)
•Inertial platform lean angle sensor
•8-level traction control
•EAS (Electronically Assisted Shift) ready (accessory)
•Modular compound-structure frame with TIG hand-welded tubular steel trellis and aluminium plates
•Öhlins suspension with electronic control (F4 RR)
•Brembo monobloc brake calipers (model M50 on the F4 RR)

Pure performance

Design and technology, power and electronics: The F4 boasts exceptional design, performance, components and ride quality. Designed for those who demand the absolute best both on and off the track, this four-cylinder model once again revolutionizes the
concept of the superbike.

The F4's racing windshield is designed to effectively pierce the air, while at the same time protecting the rider at high speeds. Offering maximum comfort, a stylish design and unparalleled aerodynamics, the new F4 is both balanced and seductive, impossible to resist. The compact and highly-efficient headlight is now flanked by elegant light guides just beneath the airbox intake, delimiting the lower spoiler. This feature serves both a functional and aesthetic purpose, rendering the F4 even more personal, recognizable and safe.

Ride-By-Wire with electronic engine management. From the throttle to the throttle body. From the rider's wrist to the fuel injectors. From desire to execution. Thanks to its MVICS system (Motor & Vehicle Integrated Control System), the F4 ensures maximum power and torque delivery at all times. For the rider, an invisible yet highly effective support. For the motorcycle, a technological
breakthrough that's immediately reflected in performance and ride quality, exalting the excellence of MV Agusta engineering both on and off the track.

The tail of the F4 is a symmetrical masterpiece, ergonomically moulded for maximum rider and passenger comfort, while at the
same time elegantly housing the new version of the famous pipe organ exhaust system. The compact tail light, set like a gem between the exhaust pipe and the passenger pillion, has been rendered even more effective and original thanks to the presence of a light guide, which defines its perimeter and enhances the overall design. Furthermore, in order to ensure maximum safety under all conditions,
its brightness has even been improved.

Engine

An advanced four-cylinder ‘short-stroke’ engine powers the entire F4 range. Piston diameters of 79 mm are combined with a stroke of 50.9 mm. On the F4 RR the peak rev limit has been raised to 14,000 rpm. Assembly is now marked by an even greater degree of expert craftsmanship to give absolute precision, with all components being selected and measured to ensure perfect uniformity and maximum performance: a procedure unique to MV Agusta. The engine timing system has been given an extensive upgrade: the intake and exhaust valves now use a single spring instead of the two seen on the previous model, thus reducing moving mass and boosting both maximum engine revs and the rev variation rate. The piston blanks are hard-anodized, making them even more durable and reliable. The con rods on the F4 RR are made of titanium, a solution more akin to a GP racer than a production machine, giving improved strength and lightness; the engine also features a rebalanced crankshaft. The oil circuit has been redesigned, both inside and outside the crankcase, ensuring perfect main bearing and con rod lubrication and thus boosting reliability, even under extreme conditions. Moreover, the engine now runs at lower temperatures thanks to enhanced radiator efficiency and redesigned oil routing. The short-stroke inline four-cylinder engine is available in two power configurations: on the F4 it reaches 195 hp, while the F4 RR puts out a jaw-dropping 200.8 hp. The fuel delivery system features 50 mm diameter throttle bodies with a fully revised variable length intake tract (TSS). The gearbox is - as on all MV Agusta four-cylinder engines - a six-speed unit, with the clutch featuring a mechanical slipper device. Four engine maps are available: three default one plus a fourth that can be customized by the rider.

Design

The personality of the F4 has now been sharpened even further by combining a design solutions with distinctive features that have already seen the F4 walk away with countless best-looking-bike awards. Now details boost its appeal even further, this time with light playing a key role in the choice of new graphics and color and, of course, in headlight and tail light design. The front headlight is flanked by two distinctive ‘light guides’ on the leading edge of the spoiler, thus making an aerodynamic part essential to the bike’s frontal look, both day and night, and boosting safety by improving frontal visibility. Similarly, an integrated light guide increases the brightness of the rear light assembly. Completely wheel designs offering considerable weight reduction are available in two versions. The first, on the F4, utilizes razor thin spokes and a silver finish. The second, on the F4 R cuts weight and material thickness even further thanks to a special aluminium alloy forging process and offers attention-grabbing race-inspired design. There has also been a significant upgrade to the four-tailpipe exhaust system, a characteristic feature of the F4 ever since its inception. The two outer pipes are now much shorter and tapered, while the central pair extends beyond the end of the tailpiece. Making the F4 even racier - and lighter - than ever.

Electronics

The MVICS (Motor & Vehicle Integrated Control System) platform integrated on the F4 ensures precision control of multiple engine maps and rider assistance devices such as traction control and EAS (Electronically Assisted Shift) ready (accessory). Electronic redundancy ensures maximum effectiveness and safety: data from the two potentiometers is cross-checked with analogue signals, while a third sensor confirms the complete throttle closure requirement; two additional sensors are installed on the throttle bodies. Developed specifically for F4 - is the inertial platform sensor set-up: this uses three gyroscopes and three accelerometers and provides the electronic control unit with an array of moment-by-moment info on vehicle dynamics. Consequently, traction control intervention is particularly accurate, thanks also to an encoder on the front wheel. This is a system that boosts both safety and performance, simplifying the entire riding experience, a key goal of the F4 project. The algorithms that define operation of the MVICS system continuously maximize the available torque at the rear wheel according to both road conditions and the rider’s own demands while electronically assisted gear shift, shortens gear changing times. A further innovation is the Custom map, which lets you choose your own settings as an alternative to the default Normal, Sport and Rain options. This lets you customize five parameters (throttle sensitivity, torque, speed limiter, engine response and engine braking) so you can build up an engine control map that reflects your own individual riding style.

Frame and Suspension

The hallmark structure and geometry of the F4 remain unchanged. The frame consists of two distinctive elements, developed by MV Agusta to offer the advantages of two solutions that are usually proposed separately. The main section of the frame, in fact, is made of CrMo steel tubing: this joins to a pair of cast aluminium alloy plates to form a complete structure and provide a pivot point for the sculpted single-sided swingarm. Further frame optimization has reduced weight without sacrificing rigidity. The F4 RR is also hand-welded using TIG technology and uses a dedicated steel with exceptional mechanical properties. The three versions offer three distinct combinations of fork and shock, while all provide the traditional F4 handling strengths. The F4 features a 50 mm Marzocchi fork and Sachs monoshock, both fully adjustable. As you’d expect, the F4 RR offers up a concentrate of technological excellence and complete personalization: Öhlins suspension with electronic control lets the rider choose between different setups directly from the dashboard. A different suspension set-up is available for each of the four-cylinder engine maps; however, the rider can also adjust suspension independently of the maps. The system provides separate control for compression and rebound damping, while spring preload personalisation is manual. The electronic steering damper has both a manual and automatic setting, the latter varying its response according to vehicle speed.

Brakes

Offering state-of-the-art stopping power for the hypersports category, the F4 RR braking system features two 320 mm front discs with steel braking rotors, paired with the Brembo Monobloc M50 – (M4 for F4) the very best in terms of performance, weight and stiffness - and a dedicated radial pump. The system is completed by a four-piston rear caliper operating on a 210 mm disc.