|
Ossa Yankee 500 SS

|
Make Model |
Ossa Yankee 500
SS |
|
Year |
1976 |
|
Engine |
Air cooled, two stroke, parallel twin, |
|
Capacity |
488 |
|
Bore x Stroke |
72 x 60 mm |
|
Compression Ratio |
8.0:1 |
|
Induction |
2x IRZ 24mm |
|
Ignition / Starting |
Motoplat electronic / kick |
|
Max
Power |
58 hp @ 7500 rpm |
|
Transmission / Drive |
6 Speed / chain |
|
Front Suspension |
Hydraulic telescopic forks |
|
Rear Suspension |
Dual shocks |
|
Front Brakes |
Single disc |
|
Rear Brakes |
Single disc |
|
Front Tyre |
3.25 x 18 |
|
Rear Tyre |
4.00 x 18 |
|
Dry-Weight |
158 Kg |
|
Fuel Capacity |
18 Litres |
In the 1960's, John Taylor of Schenectady, New York
decided to begin building in the United States, a dual-purpose motorcycle, that
would not only compete with European enduro-type motorcycles, but excel by being
more powerful, better built, more reliable, and faster.
There were only about 760 of this model built by
Yankee Motor Company back in the early '70's.
The concept for the engine had been designed by Eduardo Giró of the OSSA factory
in Barcelona, Spain. The engine was actually a joining of two single-cylinder, 2
cycle, air-cooled engines into one torquey twin with a common crankshaft and
cases. Although the engine was designed primarily for the roadrace courses of
Europe, Eduardo wanted this engine to offer versatility for both road and dirt
use.
The engine could be made to fire with both pistons
together, as a large single cylinder engine would and, with a relatively easy
method, be made to fire with each piston taking its turn at the top of the
stroke, as most twin-cylinder engines of the time did. Originally, it began with
the OSSA 230 cc. engine cylinders, pistons, and crankshafts, but by the time the
motorcycles were actually produced, the OSSA became a 250 cc, and therefore, the
Yankee became a full 500 cc twin.
This was 1969 and OSSA was a growing force in the
off-road motorcycle market. Yankee Motor Company imported the OSSA moto-cross
and enduro models, seeing great growth in those years, 1968-71. With the help of
dirt-track expert, Dick Mann, the OSSA's were more than competitive in the 1/4
mile short track races of the time.
This success spawned the production of the DMR, the
Dick Mann Replica, a highly tuned 250 cc OSSA engine set in a special frame
totally manufactured in the Schenectady facility. This run of 250's was a trial
for the soon-to-be 500 cc Yankee Z motorcycle.
Delays in production were eventually the Yankee's
downfall, as lighter, more reliable motorcycles made their way into the American
market. By the time the first Yankees rolled off the assembly line in 1971, the
weight differences were large enough to make the serious enduro rider shy from
owning the Yankee.
Source
yankeetwin.com

|